Pictured below are the before and after shots of a bearing retainer adapter. This is a recent project off of Doty’s large VTL. This bearing retainer adapter is machined from a steel 1045 forging. It has 18-1.375 holes at 41.75 bolt circle diameter through 13.5 inches of material. It was machined by one of Doty’s talented craftsmen. Another quality project […]
Archive | February, 2016
Noted below is a galvanized tank that was formed and fabricated at Miller Mechanical and machined and assembled at Doty Machine Works. A perfect combination of companies working together to provide one of our valued customers with quality workmanship. Another example of excellence in manufacturing in upstate New York.
Pictured below is an Oxygen Regulator machined by Doty’s craftsmen on our Puma CNC VTL. It has been cleaned, assembled and tested for our customer in South Carolina. Just another example of quality manufacturing in Upstate New York.
Pictured below is a wave roll for our local pulp and paper facility. The material came in as a piece of 3 ½” round hot rolled steel. It was machined by Tom, one of our seasoned machinists, in our Poreba CNC Lathe, utilizing our MasterCam software.